Mods and Tweaks

• All configuration files can be found here: C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Config
• Your saved CarSetup Files find here: C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Setups
• saved Controls find here: C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Customs \ Controls
• Recommended program for this: Notepad++

HUD

Big HUD

Big HUD: 2560x1440 with 400%

In the game you can set in the settings that HUD to 120%. Bigger? Yes!

1. got to C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Config
2. open the File hud.json
3. scroll down to the penultimate row: overallHUDScale
4. edit value, example: 4.0 = 400%
5. save and start ACC and go to Track

"fPSVisible": ,

"fPSVisible": 1;

1. got to C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Config
2. open the File hud.json
3. go to Row "fPSVisible"
4. Set value to 1

Racing Wheels

Force Feedback Frequency

Force Feedback Frequency edit

• OBSOLETE: Can selected for quite some time in the options. Game Settings / Force Feedback - FFB
• CAUTION: For old racing steering wheels, example G25 / G27, leave the value at 2

1. got to C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Config
2. open the File controls.json and got to "forceFeedbackIntervalSteps": ( last row ) and edit:

Value	Frequency
0	333Hz
1	222Hz
2	111Hz

WheelCheck / LUT Generator: FFB Processing

• Download WheelCheck: https://www.dropbox.com/s/3zxf5yd1bvujyi5/WheelCheck_1_72.zip?dl=0

1. Extract & Run WheelCheck
2. Max Count to: 50 or higher for better Results
3. Select Spring force: Step Long 2 (linear force test)

• Download LUT Generator: https://www.racedepartment.com/downloads/lut-generator-for-ac.9740/

1. Ectrect & Run LUT Generator
2. Select the CSV generated from the WheelCheck ( Dokuments/log2_DATE.csv )
3. Save the generated LUT File under Documents/Assetto Corsa Competizione/cfg/myLut.lut
4. Now you should see the Output Graph

The Picture is from a Fanatec Base 2.5

• Create Documents/Assetto Corsa Competizione/cfg/ff_post_process.ini with followed content

[HEADER] VERSION=1 TYPE=LUT ENABLED=1 [GAMMA] VALUE=1 [LUT] CURVE=myLUT.lut

Note: Minimum Force: 0; must be set to "0" to work correct.

Control-Setting: Logitech G27 / G29

• dIrtYs ACC G27 controls.json - https://www.racedepartment.com/downloads/dirtys-acc-g27-controls-json.26224/
• ACC G29 controls.json - https://www.racedepartment.com/downloads/acc-g29-controls-json.26804/

Alternative Software

CrewChief - Alternative Spotter

http://thecrewchief.org/

Racing Sim Tools - An alternative to MoTeC

It must be purchased a license.

https://www.racingsimtools.com/software