Game Settings/en

Video

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Fullscreen	Here you can set whether the game should be displayed in full screen or in the window. Full Screen is resource efficient. Because Windows stops or ends all resources that are not relevant to the game. In frameless window or window mode, the game behaves like any program.	menuSettings.json	useFullscreen
Resolution	Higher values ​​lead to a better picture. It is recommended to choose the native resolution of your monitor. For more resolution manipulation settings. ↓ Basic / Resolution Scale ↓ Advanced / Temporal Upsampling	menuSettings.json	resolution (x, y)
V-Sync	It allows synchronizing the frame rate of the game with the monitor refresh rate for a better stability and smoother image. Disabling V-Sync can Result in higher frame rate but this action may introduce unwanted artefacts in the Game. You may experiance some output lag when V-Sync is turned on. When you have a Free-Sync or G-Sync Monitor you can turn V-Sync off.	... .json
Framerate Limit	limit the maximum amount of FPS that should be achieved ( works with V-Sync on and off )	menuSettings.json	frameLimit
Menu Framerate Limiter	Avoid excessive GPU usage in the menus by capping the framerate in the main UI.	menuSettings.json	graphicOptions → fpsCapUI
Triple Screen	Turn on triple-screen support ↓ View Settings incl. Triple Screen	menuSettings.json	useTripleScreen
HDR Output	Enables high dynamic range output on HDR-compatible Displays.	menuSettings.json	useHDROutput

View Settings / Triple Screen

You won't find these settings in these options. You have to be in a vehicle to get there. Now press the ESC-key on your keyboard, a menu with various options appears. Click on "View Settings" there.
Not all settings are available for the different driving views ( F1 key)

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Height	Adjust driver eye level / -30 to 30	cameraSettings.json	(carname) offsets: x
Lateral	adjust the seat to left or right / -30 to 30	cameraSettings.json	(carname) offsets: y
Distance	Distance Driver to Cockpit / -60 to 60	cameraSettings.json	(carname) offsets: z
FOV	Field of View / 10° to 90°	cameraSettings.json	cameraFOV
Pitch	adjust the angle of view downwards or upwards / -20.0° to 20.0°
Driver & Wheel	Both / Wheel only / Locked Wheel / Hidden
Dashboard Display in HUD	ON / OFF	cameraSettings.json	dashInHud
Dashboard Display Opacity	/ 0 to 100%	cameraSettings.json	dashOpacity
Lock to Horizon	Hold on to the horizon :) / 0% to 100%	cameraSettings.json	horizonLock
Movement	Adjust vehicle movement / 0% to 100%
Dashcam Factor	How much of the set vehicle movement should be taken over in the DASH perspective. / 0% to 100%	cameraSettings.json	dashcamFactor
Look with Wheel	Adjust head movement when steering / 0% to 100%	cameraSettings.json	lookWithSteerGain
LWW Gamma	/ 0% to 100%	cameraSettings.json	lookWithSteerGamma
LWW Smooth	/ 0% to 100%	cameraSettings.json	lookWithSteerSmoothing
Projection Correction	/ 0.0 to 1.0
TRIPLE SCREEN
Distance From Screen	Set here how big is the distance from your eyes to the middle monitor / 0mm to 3000mm	cameraSettings.json	tripleDistance
Screen Width	/ 0mm to 3000mm	cameraSettings.json	tripleWidth
Bezel Width	How wide are the side edges of your monitors / -1000mm to 1000mm	cameraSettings.json	tripleBezel
Side Screen Angle	At what angle to the middle monitor are the side monitors set up. / 0° to 90°	cameraSettings.json	tripleAngle
HDR
HDR Exposure		cameraSettings.json	hDRExposure
HDR Contrast		cameraSettings.json	hDRContrast

Predefined Settings

Setting	Description	is saved under
Manage Custom Video Presets	Save your graphic sets here ( only settings from here on )	Documents\Assetto Corsa Competizione\Customs\VideoSettings
Presets	select: LOW / MID / HIGH / EPIC / VR LOW / VR HIGH / CUSTOM ( or the name of the saved custom preset used )

Basic

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Resolution Scale	It allows downscaling (for better performance) and upscaling (for better image quality) the game resolution without changing the system resolution. If you have the slider set to a value below 100, it is recommended to set the anti-aliasing mode to TAA or KTAA,the anti-aliasing quality to High, and temporal upscaling to Enabled.	menuSettings	resolutionQuality
View Distance	Set the distance from the camera for objects to be drawn.	menuSettings	viewDistanceQuality
Shadows	Set the quality of dynamic shadows of track objects. The highest settings require significant computing power. If set to Mid or lower, car/cockpit self shadowing is disabled.	menuSettings	shadowQuality
Shadows Distance	Set the distance of dynamic shadows of track objects. The highest settings require significant computing power.	menuSettings	shadowDistanceQuality
Contact Shadows	Additional shadow pass that helps in occluding small details that would normally be excluded by regular shadows.
Antialiasing	Set the amount of antialiasing for the selected antialiasing type.	menuSettings	antiAliasingQuality
Antialiasing Type	Set the method here with which jagged edges on objects can be avoided. TAA: Temporal Antialiasing. A core feature of Unreal Engine 4, it works by taking many samples of edge areas across several frames. The problem with it is that it produces a soft, blurry image along with ghosting artifacts. You can sharpen the picture with the following options: ↓ Advanced / Advanced Sharpen Filter ↓ Image customization / sharpness FXAA : An older and much faster AA technique; the overall picture is shown sharper, but the edges are only very slightly smoothed. KTAA : is a Kunos-edited version of TAA that cuts down on the ghosting artifacts.
TAA Gen5	Eneables Gen5 Temporal AA Upsampling method. Improves the visual quality of Temporal anti-aliasing at a moderate performance cost. Only selectable with Temporal anti-aliasing type.	menuSettings	tAAGen5
DLSS	NVIDIA DLSS ( Deep Lerning Super Sampling ) DLLS is a deep lerning neural network developed by NVIDIA that increases graphics performance. DLSS take a lower internal render resolution and increases the pixel count to a target resolution using AI processors on NVIDIA RTX GPUs, called Tensor Cores. DLSS requirements: NVIDIA RTX GPU with DLSS support ( 20XX or newer ) Windows 10, 64bit, Version 1709, Windows 10 Fall 2017 Creators Update NVIDIA GPU driver version 470 or higher ( recommended version 496.79 or higher ) Using DLSS will override other anti-aliasing methods and their functions.	menuSettings	dLSSEnable
DLSS Quality	DLSS mode settings Qualitiy Balanced Performance Ultra Performance Each setting defines the level of super sampling with different ratio of render and target resolutions. "Quality" setting prioritizes image quality by rendering the game internally at the closest relotution possible to the target, while "Ultra Performance" prioritizes performance with the highest difference between the internal and output resolution. In between, "Balance" and "Performance" settings aim for various levels of compromise between graphical fidelity and performance gain.	menuSettings	dLSSQuality
DLSS Sharpness	Sharpening filter applied on the DLSS pass. Recommended to be used inversely with quality mode ( higher quality - lower sharpening percentage ). Recommended default is 0%.	menuSettings	dLSSSharpness
FSR	AMD FidelityFX - Super Resolution ( FSR ) FidelityFX - Super Resolution is a spatial upscaler: it works by taking the current anti-aliasing frame and upscaling it to display resolution, without relying on other data such as frame history or motion vectors, producing a high-fidelity image at a performance gain over traditional rendering methods. At the heart of FSR is a cutting-edge algorithm that detects an recreates high-reolution edges from the source image. Fidelity FX Super Resolution is a compatible with AMD and NVIDIA GPUs. With no built-in anti-aliasing override, FSR can be combined with other TAA features.	menuSettings	aMDFSREnable
FSR Quality	FSR Presets Ultra Quality mode produces an upscaled image with quality very close to native rendering. It should be selected when the highest quality is desired. Quality mode produces an upscaled image with quality representive of native rendering, with a sizeable performance gain. Balanced mode produces an upscaled image approximating native rendering quality, with a mojor performance gain compared to native. Performance mode visibly impacts image quality and is suited for situations where needing additional performance is critical. Custom mode allows the user to customize the source resolution scale with complete freedom, including the ability to use native resolution ( 100% ) or supersampling ( Higher than 100% ) with the added benefits of FSR`s proprietary sharpening method ( RCAS )	menuSettings	aMDFSRQuality
FSR Sharpness	FidelityFX Super Resolution uses a highly efficient sharpening method called Robust Contrast Adaptive Shapening ( RCAS ) Recommended to be used inversely with FSR quality preset ( Higher quality mode - lower shapening percentage ). Recommended default 80%.	menuSettings	aMDFSRSharpness
Effects	Set the quality of visual effects. Setting this to High or Epic enables screen-space reflections in addition to the default dynamic cubemaps.	menuSettings	effectsQuality
Post Processing	Set the quality of post-processing effects such as motion blur and depth of field. This also alters the ambient occlusion effect. If set to Low, ambient occlusion is disabled.	menuSettings	postProcessQuality
Foliage	Set the level of visible secondary-level vegetation. If set to Low, grass is disabled.	menuSettings	foliageQuality
Texture	Set the quality Level of Object Textures.	menuSettings	textureQuality
Mirror Quality	Set the quality for the image in the mirrors.	menuSettings	mirrorQualityLevel
Mirror View Distance	Set the Distance of opponent cars to be shown in the Mirrors.	menuSettings	mirrorDistance
Mirror Framerate Limit	Sets the refresh rate ( in frames per second ) for the mirror. The options available are: "AUTO" which will adappt the rate mirror are redrawn based on the game`s overall framerate up to a maximum of 60 frames per second and a minimum of 20. "1/2" and "1/3" which keep the mirrror refresh rate of half or one third the games`s overall framerate. and a series of fixed framerates ranging from 20 to 90 FPS
Mirror Resolution	Set the resolution of the image rendered in the Mirrors.	menuSettings	mirrorsResolution
Opponents visibility	Set the Number of visible opponent Cars at the same Time. Rendering fewer Cars can allow you to race with larger Grids.

Virtual Reality

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
VR Pixel Density	Set the percentage of samples for VR rendering. Going over 100% results in a sharper Image but requires more processing power.
Virtual to Real Scale	Decreasing this value will increase the perceived world scale.

Advanced

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Materials Quality	Level of complexity of some Materials. Setting this to Epic enables extremely performance-intensive tesselation effects on the kerbs and gravel, giving them a 3D effect.	menuSetting.json	materialsQuality
Temporal Upsampling	Engine feature used in conjunction with Resolution Scale. Results in a better Overall Image Quality when ↑Basic /Resolution Scale is lower than 100. It is also useful to avoid specular higlight flickering off of lit materials.	menuSetting.json	temporalUpsampling
Bloom Quality	Quality level of light diffusion in high contrast scenarios.	menuSetting.json	bloomQuality
Volumetric Fog	Atmospheric effect that makes haze visible when hit by light.	menuSetting.json	volumetricFog
Foliage LOD Quality	Simple multiplier for instanced mesh LOD switching. Epic setting can impact GPU Performance with low/mid-range configurations.	menuSetting.json	foliageLodQuality
Car LOD Quality	Adjust car model level of detail - lower values make cars appear less detailed in the distance at the benefit of higher framerates.	menuSetting.json	carLODSet
HLOD	Enable or disable HLOD's. HLOD is a hierarchical level of detail function that combines complex track objects into simplified objects at greater distance. Enabling them increases performance by lowering the number of draw calls per frame.	menuSetting.json	hLODEnabled
Advanced Sharpen Filter	An additional post-processing Filter that improves clarity for details further away from the playing position. It is highly suggested to Enable Advanced Sharpen Filter only if Sharpen setting in the Basic tab is unchanged.	menuSetting.json	advancedSharpenFilter

Image customization

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Motion Blur	Show blur effect with the fast movement of track objects.	menuSettings.json	isMBlurEnabled
Saturation	Set the amount of color saturation of the ingame image.	menuSettings.json	colorSaturation
White Balance	Adjust the white balance of the in-game image. The Settings range from cold to warm.	menuSettings.json	whiteBalance
Sharpness	Set the percentage of a post-processing filter that increases the sharpness of the overall image. It is highly suggested to edit Sharpness only if Advanced Sharpen filter is disabled.	menuSettings.json	sharpen
Camera Dirt Effect	Post-Processing Effect that simulates a dirty lens in the Camera. Setting it to 1.0 disables the effect.	menuSettings.json	cameraDirtLevel
Image Contrast	Adjust the contrast of the ingame image.	menuSettings.json	imageContrast
Exposure Gain	Adjust the exposure gain of the in-game image	menuSettings.json	imageExposureGain
Tone Mapping	Selects the filmic tonemapper ( ACES ) or the legacy ( Default ) one. THe filmic tonemapper gives a cinematic look more similar to the one used for output.	menuSettings.json	useLegacyTonemapper
HDR Color Gamut	Selects between REC2020 ( standard color gamut for HDR ) and DCI-P3 ( closer to current HDR displays, colours are more saturated )	menuSettings.json	hDRColorGamut
HDR UI Brightness	Adjust the brightness of the UI when using HDR output.	menuSettings.json	hDRUILevel

Audio

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Output Device	Sets the Output Device for the Audio Output.	menuSettings.json	audio → driveraudio → name
Master	Sets the overall volume.	menuSettings.json	audio → main
Onboard Engine	Sets the volume of onboard engine sound.	menuSettings.json	audio → engineInt
Exterior Engine	Sets the volume of exterior engine sound.	menuSettings.json	audio → engineExt
Tyres	Sets the volume of tyre skids, brake squealing, ABS, kerbs rumble and surface noises.	menuSettings.json	audio → wheel
Chassis	Sets the volume of sounds emitted by the car`s suspension, chassis and air-jacks.	menuSettings.json	audio → bodywork
Damage	Sets the volume of crashes, vehicle damage and bodywork sounds.	menuSettings.json	audio → damage
Opponents	Sets the volume of the opponents. This value is a factor multiplied by the exterior engine volume.	menuSettings.json	audio→ opponent
Weather	Sets the volume of wind, rain and thunder when using onbard cameras.	menuSettings.json	audio → wind
Ambience	Sets the volume of the soundscape ( crowd, track, speakers, pit lane alarm ), rain and thunder when using track cameras.	menuSettings.json	audio → environment
Radio Comms	Set the volume of the radio comms.	menuSettings.json	audio → comms
Starting Comms	on/off	menuSettings.json	audio → startingComms
Spotter	Enables or disables Spotter calls, such as "Car left", "Clear", etc.	menuSettings.json	audio → spotter
Music	Sets the volume of the menu music.	menuSettings.json	audio → music
User Interface	Sets the volume of the interface interactions.	menuSettings.json	audio → gui
Video Sequences	Sets the volume of the Video Sequences.	menuSettings.json	audio → video

Controls

The simulation is playable with FFB Racing Wheels, XBox-GamePad and Keyboards.

FFB Racing Wheels Support

Brand	Wheels / Sets	Pedals	H-Shifter
Fanatec	all	all	all
Logitech	G25, G27, G29, G920	included with the wheels	included with the wheels G25, G27 Driving Force Shifter G29, G920
Thrustmaster	T-Series: T150, T300, TX-Racing, T500, TS-PC Racer	T3PA, T3PA-PRO, T-LCM	TH8A
Simucube	SIMUCUBE 2 Sport / Pro / Ultimate
Heusinkveld		Sim Pedals Sprint, Sim Pedals Ultimate
...

Force Feedback - FFB

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Gain	FFB strength. Use whatever is comfortable, just not so high you get FFB clipping. / 0% to 100%
Minimum Force	Only for steering wheels that have a force feedback deadzone in the center. Most notably the Logitech G25-27-29, need around 7% to 12% minimum force. Maybe some Thrustmasters need a tiny bit too, but that only affects the center dead zone of force. If the wheel shakes while going in a straight line, decrease this value. [1] / 0% to 15%
Dynamic Damping	Models real gyroscopic forces from the wheels. It makes the steering wheel more "unwilling" to move from whatever angle the front wheels point, and the faster you go the stronger it gets. 100% is the intended realistic value, but might on some steering wheels saturate the signal and cause a very flat FFB feeling (clipping).[2] / 0% to 200%
Road Effects	An artificial effect to simulate forces that are felt mostly through the body rather than through the steering wheel in a real car. Can make subtler "real" effects harder to detect if set too high. For pure FFB, you can leave it at 0. [3] [4] / 0% to 100%
Frequency	How fast should the query of the FFB information be made or processed. / 111Hz / 266Hz / 400Hz CAUTION: For old racing steering wheels, example G25 / G27, leave the value at 111Hz	controls.json	"forceFeedbackIntervalSteps"
Advanced
Steer Lock	Set maximum steering angle. Set the Native Angle of the Steering Wheel / Wheel Base. / 0° to 1200°
Steer Liniarity	... / 1.00 to 4.00
Brake Gamma	Changes the linearity of the brake axis / 1.00 to 5.00
Gearshift Debouncing	Double upshift when operating the gear? Here with a higher value try to fix. / 50ms, 60ms to 500ms

Hotkeys

Button	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
F1	Switch on the driving camera ( Driver / dash / helmet / bonnet / front / flying camera close & far )
F2	Switch HUD forward ( blank / HUD help / table / broadcast )
Shift + F2	Switch HUD backwards ( blank / HUD help / table / broadcast )
F3	Switch on TV cameras (near / far / helicopter)
F6	Switch on vehicle cameras
F7	Turn on the free camera Open Photo Mode Menu → Press the mouse wheel Camera Speed → Turn the mouse wheel Change camera direction → Mouse click and drag Change camera position - keys: ← → ↑ ↓ Unlock camera from car position: Ctrl + F7
F8	Create a screenshot. You find them under: ...:\Users\***\Documents\Assetto Corsa Competizione\Screenshots
F11	Switch window mode: window with frame and full screen
Enter	Open chat in multiplayer
Insert	Switch on the multifunction display ( RealTime / Standing / Vehicle Setup / Pitstop [ in race only ] )
TAB	current table ( in driving mode )
Shift + ←	watch next vehicle
Shift + →	watch the previous vehicle
Shift + ↑	back to your vehicle
CTRL + ←	Field of View "FOV" lower
CTRL + →	Field of view "FOV" higher
CTRL + ↑	Move driver position forward
CTRL + ↓	Move driver position to the rear
CTRL + Shift + ↑	driver position: up
CTRL + Shift + ↓	driver position: down
CTRL + Shift + ←	driver position: left
CTRL + Shift + →	driver position: right
ALT + ↑	camera pitch ( angle ): up
ALT + ↓	camera pitch ( angle ): down
ALT + ←	left indicator
ALT + →	right indicator
Shift + I	Ignition on/off
S	Start the Engine
ALT + R	Switch Wiper Mode
ALT + W	Wiper on/off
Shift + A	ABS: Increase
CTRL + A	ABS: Decrease
Shift + B	Brake Bias: Increase
CTRL + B	Brake Bias: Decrease
Shift + E	Engine Map: Increase
CTRL + E	Engine Map: Decrease
Shift + T	Traction Control - TC: Increase
CTRL + T	Traction Control - TC: Decrease
Shift + Y	Traction Control Cut -TCC: Increase ( examble: Ferrari )
CTRL + Y	Traction Control Cut -TCC: Decrease
Shift + D	Racelogic ( dashboard ) - switch to the previous display
CTRL + D	Racelogic ( dashboard ) - switch to the next display
ALT + D	Racelogic ( dashboard ) - switch through the ads
L	Light modes: on / off / endurance auxiliary lights
Shift + L	Flasher
CTRL + L	Rain light on/off ( located at the rear of the vehicle )
ALT + L	Pit Limiter on/off
V	Driver name: on/off / only in multiplayer view
NumPad2	look backwards
NumPad4	look to the left
NumPad6	look to the right
M	Save replay ( outsmart 1H limitation of replays )
ALT + M	Save highlight

General

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Language	Set the language for the Game.	menuSettings.json	currentLanguage
Skip intro sequence	Disable the intro camera sequence when entering a session. This option is automatically set to off in VR mode and Multiplayer.	menuSettings.json	skipIntroSequence
D-Box Motion	Enable or disable the D-Box motion Plugin.	menuSettings.json	isNativeDBoxEnabled
Fanatec Leds	Enable or disable the Fanatec LED Plugin.	menuSettings.json	isNativeFanatecLedsEnabled
Replay max Length	Set the maximum length of a saved replay. ( max is 1h 15min )	replay.json	maxTimeReplaySeconds
Replay quality	Set the quality level of the replay.	replay.json	replayQuality
Far AI replay quality	Set the replay quality of distant opponent cars from the player car.	replay.json	farAIReplayQuality
Auto highlights	Enable or disable automatic saving of replay highlights.	replay.json	automaticHiglightEnabled
Player-only Auto highlights	Enable or disable automatic featuring only the player car	replay.json	useOnlyPlayerCarHighlights
Manual highlights per Time	Set the pre-time duration of replay highlights.	replay.json	highlightsRecTimeBefore
Manual highlights post Time	Set the post-time duration of replay highlights.	replay.json	highlightsRecTimeAfter
Auto Save replay	Enable or disable automatic saving of replays.	replay.json	autoSaveEnabled
Min replay Time for autosave	Set the minimum reply time duration for automatic replay saving	replay.json	autoSaveMinTimeSeconds
Replay Race Autosave Slots	Set the Number of automatic saving slots for race sessions.	replay.json	autoSaveRaceNumber
Replay Qualy Autosave Slots	Set the number of automatic saving slots for qualifying sessions.	replay.json	autoSaveQualifyNumber
Replay Other Autosave Slots	Set the number of automatic saving slots for other sessions.	replay.json	autoSaveOthersNumber
16:9 Broadcast Cameras	Contrain the aspect ratio of cameras used for broadcasting to 16:9. This will cause a letterbox/pillarbox effect on screens of a different aspect ratio. HINT: changing this setting will only take effect after reentering the session.
Pitcrew Animation	Toggle the visibility of the pit crew and related animations.	menuSettings.json	pitcrewAnimationEnabled
Pit Markers	Toggle the visibility of additional animated pit marker.	menuSettings.json	pitmarkersVisible
Rating	Allow to turn off Rating for Singleplayer game modes. You can use this to protect your SA Rating, or just freeze your Ratings while you show Assetto Corsa Competitione to friends and family. Please note that this intended to disable any kind of progress, including Track Medals and Special Event leaderboard entries.	ksonmatchmakingparameters.json	isRatingMPOnly
Online Stats	Allows to turn off Driver Statistik for Singleplayer game modes. You can use thiss to freeze your Statistik while you show Assetto Corsa Competitione to friends and family.	ksonmatchmakingparameters.json	isStatisticsMPOnly

Assists

All of these driving aids can prohibit operators of password-protected servers, regardless of their settings. →Server Configuration / assistRules.json

Settings	Description	Documents\Assetto Corsa Competizione\Config\
		File	Line
Gearbox	GT3 racing cars use sequential gearboxes that change gears in a sequence without using a manual clutch. Automatic mode changes gears automatically, except for reverse and neutral. Automatic mode affects your realism score. (Realism score is unimplemented.)	assists.json	autoGear
Clutch	Automatic clutch mode operates the clutch automatically when the car is stopped or starts from a standstill. By doing so, it protects the engine from stalling. Note: The car will still stall with autoclutch in some situations. It changes to automatic mode if engine start is also set to automatic. Manual clutch settings will let you operate the clutch manually during start or when the car is stopped with a gear engaged. Failing to operate the clutch correctly will result in the car stalling.	assists.json	autoClutch
Engine Start	Automatic engine start means the engine will start automatically even when you spin or stop with a gear engaged. If the engine stalls, it will start again automatically. When it is selected, the clutch will also be set to automatic mode. Manual engine start requires you to set up inputs to control the ignition and engine starter. If the engine stalls while driving, you will need to restart it by pressing the key or button configured in the controller settings.	assists.json	autoEngineSwitch
Wipers	Toggles automatic or manual wipers. The automatic wiper function will automatically enable the wiper and set the appropriate wiper speed according to the weather conditions. It also senses water spray kicked up by opponent cars in front of the player.	assists.json	autoWiper
Lights	Toggles automatic or manual lights. Using automatic lights will automatically turn on the appropriate light stage according to the time of day and weather conditions.	assists.json	autoLights
Pit Limiter	Toggles automatic or manual pit limiter. The automatic pit limiter will engage the pit limiter when crossing the pitlane entry line. However, the automatic pit limiter does not function as automatic brake, the car still needs to be slowed down to the pit speed limit before entering the pitlane. Also, you need to be in first gear. When you shift up, it will automatically turn off the limiter.	assists.json	autoPitLimiter
Stability Control	Stability control allows more stable cornering and makes it harder to spin. The higher percentage is set, the more stable the car will be, and thus, easer to drive. The use of stability control is prohibited in blancpain regulations, so this setting is to be considered an additional gameplay assist and not a realistic option. Enabling any percentage of stability control affects your realism score. (Realism score is unimplemented.)	assists.json	stabilityControlLevelMin stabilityControlLevelMax
Ideal Line	Enabling the Ideal line draws a graphical line on the circuit that is visible during driving. The line shows the optimum racing line to follow. The line will change colours if you need to brake before a curve or accelerate out of a curve. Enabling the Ideal line affects your realism score. (Realism score is unimplemented.)	assists.json	showIdealLine

HUD

	Settings		Description	Documents\Assetto Corsa Competizione\Config\
				File	Line
	-	Scale	Adjust the overall scaling of all the HUD elements.	hud.json	overallHUDScale
	-	Left Margin	Set lateral HUD margins, increase to bringing HUD elements closer to the center of the viewport.	hud.json	safezoneLeft
	-	Right Margin	Set lateral HUD margins, increase to bringing HUD elements closer to the center of the viewport.	hud.json	safezoneRight
	6	Gear / Speed	Enable or disable the gear and speed widget on the racing HUD. This widget shows basic information about the car, uncluding engine speed, ground speed, traction control, ABS, brake bias levels and pedal inputs.	hud.json
	1	Lap Time	Enable or disable the Lap timing information on the HUD.	hud.json
	11	Circuit Map	Enable or disable the circuit map overlay on the racing HUD.	hud.json	trackMapVisible
	7	Tyres App	Enable or disable the tyres widget on the racing HUD.	hud.json
	10	Session Info	Enable or disable the session information overlay on the racing HUD.	hud.json
	5	Rating Practice Info	Adjust the competence focus of the rating widget in the practice sessions. Use this option to work on specific driving competences, such as driving consistency and car control.	hud.json
	-	Radar	Enable or disable the radar widget on the racing HUD. The radar increases spatial awareness by displaying cars in the proximity of the player car, and uses visual cues to alert the player of overlap to help avoid collisions.	hud.json
	-	Pit Info & Driver Timers		hud.json
	8	Light Indicators		hud.json	lightIndicators
	-	Speed Units	Set metric or imperial units when displaying speed values on the racing HUD.	hud.json	useMPH
	4	Virtual Mirror	Enable or disable the virtual mirror. The virtual mirror allows the player to see the mirror image even with narrow field of view. This will not work in VR.	hud.json	virtualMirrorVisible
		Proximity Indicators	Enable or disable the proximity indicators on the racing HUD. Proximity indicators help indicate opponent cars behind and on the side of the player car.	hud.json	proximityIndicatorsVisible
	-	Green Light	Enable or disable the green light indicator shown at the start of a race.	hud.json	greenLightsVisible
	-	Driver Name Tags	Enable or disable driver name tags over cars. Settings include enable, disable and Multiplayer only.	hud.json	showDriverNamePlates
	9	Server Statistics	Display server connection statistics during multiplayer session.	hud.json	serverStatsVisible
	-	Pop-Up Chat Messages	Enable to have new chat messages pop up in the HUD	hud.json	chatPopupOnMessage
	-	Centered Comms Panel	Set the minimum priority of communication messages to display. Available priorities are Low, Normal, High and Maximum.	hud.json
	-	Minimum Message Priority	Enable this to display all communication pamel messages in the lower center of the HUD regardless of priority.	hud.json
	2	race data		hud.json
	3	PitLimiter Warning	is permanently displayed if the pit limiter has not been activated in the pit lane	hud.json

Tweaks

Prevents self-generating DDS files for SkinMods

• go to File menuSettings.json: Documents\Assetto Corsa Competizione\Config
• search to ”texDDS”: 1,
• change value 1 to 0 ( change only if ACC is not running )

Better graphics for SkinMods

• go to File menuSettings.json: Documents\Assetto Corsa Competizione\Config
• search to ”texCap”: 1,
• change value 1 to 0 ( change only if ACC is not running )

WheelCheck / LUT Generator: FFB Processing

• 

  Wheel_check

• 

  The Picture is from a Fanatec Base 2.5

• Download the iRacing WheelCheck: https://www.dropbox.com/s/3zxf5yd1bvujyi5/WheelCheck_1_72.zip?dl=0

1. Extract & Run WheelCheck
2. Max Count to: 50 or higher for better Results
3. Select Spring force: Step Long 2 (linear force test)

• Download LUT Generator: https://www.racedepartment.com/downloads/lut-generator-for-ac.9740/

1. Extract & Run LUT Generator
2. Select the CSV generated from the WheelCheck ( Documents/log2_DATE.csv )
3. Save the generated LUT File under Documents/Assetto Corsa Competizione/cfg/myLut.lut
4. Now you should see the Output Graph

• Create Documents/Assetto Corsa Competizione/cfg/ff_post_process.ini with followed content

[HEADER] VERSION=1 TYPE=LUT ENABLED=1 [GAMMA] VALUE=1 [LUT] CURVE=myLUT.lut

Bigger HUD

The size of the HUD elements can be increased. This is helpful for higher-resolution screens, as well as VR.

1. Go to C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Config
2. Open the file "hud.json"
3. Scroll down to overallHUDScale
4. Edit the value, example: 400%
5. Save, start ACC, start a session, hit Drive and observe the changes to the HUD.

FPS / System Info make visible

1. Go to C: \ Users \ *** \ Documents \ Assetto Corsa Competizione \ Config
2. Open the file hud.json
3. Go to "fPSVisible"
4. Set value to 1

References

• Dynamic Dambing - Details by Pax - https://www.assettocorsa.net/forum/index.php?threads/dynamic-damper-details.52794/
• Mabix: https://www.youtube.com/watch?v=2KuGmLaKkyE | Meine GRAFIKEINSTELLUNGEN in ACC | Assetto Corsa Competizione Settings | Tutorial German | YouTube
• CrewChief CrewChief - Alternative Spotter
• Logitech G27 - dIrtYs ACC G27 controls.json
• Logitech G29 - ACC G29 controls.json
• Thrustmaster TX Racing Base + OpenWheel Addon + T-LCM Pedals - dIrtYs contols.json for Thrustmaster: TX-Base+OpenWheel+T-LCM Pedalset