Difference between revisions of "Setup Guide for Beginners"

From ACC Wiki (Unofficial)
Jump to navigation Jump to search
 
(32 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 +
[[Category:Car Setup]]
 +
[[Category:Guides]]
 +
 
== Tyres ==
 
== Tyres ==
 +
[[File:Acc_wiki_carsetup_tyre.jpg|thumb|Current Setup / TAB Tires]]
  
−
=== Chamber ===
+
=== Pressure ===
  
−
Camber enables more tyre surface area to touch the track,�giving more grip, countering leaning of the car while turning. ��Check IMO Readings to set camber angle.  
+
For GT3, Cup and ST cars the tyre pressure between 27.0 and 28.0 PSI is optimal for dry tyres. For wet tyres, it is between 30 and 31 PSI.
 +
For GT4 cars, tyre pressures between 26.5 and 27.0 PSI are optimal while racing in dry conditions.
 +
 
 +
What should you think of:
 +
# Get tyre pressures in the range between 27 - 28 PSI resp. 26.5 - 27 PSI for GT4 cars.
 +
# Use IMO tyre temperatures for tweaking of camber and toe settings
 +
# If for whatever reason your tyre temperatures aren't in the operation window, use brake duct settings, since heat from the brakes also effects tyre temperatures
 +
 
 +
=== Toe ===
 +
 
 +
Angle of the wheels, looking from above. You should only have toe out in the front, and only toe in at the rear.
 +
 
 +
{| class="wikitable"
 +
|-
 +
! In !! Out
 +
|-
 +
| [[File:Sgfb_toe_in.png|left]] || [[File:Sgfb_toe_out.png|left]]
 +
|}
 +
 
 +
=== Camber ===
 +
 
 +
Camber enables more tyre surface area to touch the track, giving more grip, countering leaning of the car while turning. You should only have negative camber.
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Neutral !! Negative !! Positive
 +
|-
 +
| [[File:Sgfb chamber 0.png|left]] || [[File:Sgfb chamber -5.png|left]] || [[File:Sgfb chamber +5.png|left]]
 +
|}
 +
 
 +
Check IMO Readings to set camber angle.
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Negative !! Positive
 +
|-
 +
| [[File:Sgfb chamber negative.png|left]] || [[File:Sgfb chamber positive.png|left]]
 +
|}
  
 
=== Caster ===
 
=== Caster ===
  
−
Caster angle impacts the stability of the car and how heavy the�steering feels. It also causes car to steer to self center.��For Sim Racers, not to much important, because of FFB settings,�best to leave it at stock angle.
+
Caster angle impacts the stability of the car and how heavy the steering feels. It also causes car to steer to self center. For Sim Racers, that's not too important because of FFB settings, so it's best to leave it at the stock angle.
 +
 
 +
{| class="wikitable"
 +
|-
 +
! Neutral !! Negative !! Positive
 +
|-
 +
| [[File:Sgfb_caster_neutral.png|left]] || [[File:Sgfb_caster_negative.png|left]] || [[File:Sgfb_caster_positive.png|left]]
 +
|}
  
 
== Electronics ==
 
== Electronics ==
  
 
== Fuel & Strategy ==
 
== Fuel & Strategy ==
 +
 +
=== Brake Pads ===
 +
There are 4 types of brake pads. By default, type 2 is selected.
 +
 +
Type 1: High performance, high wear. About 2.5 hours lifetime.
 +
 +
Type 2: Medium performance, medium wear. About 12 hours lifetime.
 +
 +
Type 3: Low performance, low wear. Used for cold conditions and rain.
 +
 +
Type 4: Very high performance, very high wear. Not normally used, but can be used for short practice and qualifying stints.
  
 
== Mechanical Grip ==
 
== Mechanical Grip ==
Line 162: Line 221:
 
|-
 
|-
 
| <b>All Over:</b>
 
| <b>All Over:</b>
−
1. Decrease pressures<br/>
+
1. Increase pressures<br/>
 
2. Decrease toe value<br/>
 
2. Decrease toe value<br/>
  
Line 180: Line 239:
 
|-
 
|-
 
| <b>All Over:</b>
 
| <b>All Over:</b>
−
1. Increase pressures<br/>
+
1. Decrease pressures<br/>
 
2. Increase toe value
 
2. Increase toe value
 
|}
 
|}
Line 256: Line 315:
 
</div>
 
</div>
  
 +
<div style="float:left; margin-right:1em;">
  
 
== Origin ==
 
== Origin ==
 
With the permission of Skaven Zverov the Setup Guide for Beginners from Him will be also Published here on the Wiki.
 
With the permission of Skaven Zverov the Setup Guide for Beginners from Him will be also Published here on the Wiki.
  
−
Skaven Zverov: https://www.assettocorsa.net/forum/index.php?members/skaven-zverov.192248/
+
Adam Isailovic (Skaven Zverov): https://www.assettocorsa.net/forum/index.php?members/skaven-zverov.192248/
 
ACC Forum Thread: https://www.assettocorsa.net/forum/index.php?threads/setup-guide-for-begginers.64264/
 
ACC Forum Thread: https://www.assettocorsa.net/forum/index.php?threads/setup-guide-for-begginers.64264/
  
−
[[File:Setup guide for begginers.jpeg|thumb]]
+
[[File:Setup_guide_for_beginners.jpeg|thumb|left]]
 +
</div>

Latest revision as of 11:43, 23 October 2020


Tyres

Current Setup / TAB Tires

Pressure

For GT3, Cup and ST cars the tyre pressure between 27.0 and 28.0 PSI is optimal for dry tyres. For wet tyres, it is between 30 and 31 PSI. For GT4 cars, tyre pressures between 26.5 and 27.0 PSI are optimal while racing in dry conditions.

What should you think of:

  1. Get tyre pressures in the range between 27 - 28 PSI resp. 26.5 - 27 PSI for GT4 cars.
  2. Use IMO tyre temperatures for tweaking of camber and toe settings
  3. If for whatever reason your tyre temperatures aren't in the operation window, use brake duct settings, since heat from the brakes also effects tyre temperatures

Toe

Angle of the wheels, looking from above. You should only have toe out in the front, and only toe in at the rear.

In Out
Sgfb toe in.png
Sgfb toe out.png

Camber

Camber enables more tyre surface area to touch the track, giving more grip, countering leaning of the car while turning. You should only have negative camber.

Neutral Negative Positive
Sgfb chamber 0.png
Sgfb chamber -5.png
Sgfb chamber +5.png

Check IMO Readings to set camber angle.

Negative Positive
Sgfb chamber negative.png
Sgfb chamber positive.png

Caster

Caster angle impacts the stability of the car and how heavy the steering feels. It also causes car to steer to self center. For Sim Racers, that's not too important because of FFB settings, so it's best to leave it at the stock angle.

Neutral Negative Positive
Sgfb caster neutral.png
Sgfb caster negative.png
Sgfb caster positive.png

Electronics

Fuel & Strategy

Brake Pads

There are 4 types of brake pads. By default, type 2 is selected.

Type 1: High performance, high wear. About 2.5 hours lifetime.

Type 2: Medium performance, medium wear. About 12 hours lifetime.

Type 3: Low performance, low wear. Used for cold conditions and rain.

Type 4: Very high performance, very high wear. Not normally used, but can be used for short practice and qualifying stints.

Mechanical Grip

Dampers

Aero

Solutions to Handling Issues

Braking
Loss of Control

1. Move brake bias forward
2. Decrease slow damper

Front Tyres often lock
Move brake bias backward
Car pitches to much
Stiffen front springs
Nose hits floor

1. Increase ride height
2. Adjust bump stops
3. Stiffen front springs

Excessive locking
Reduce overall brake pressure (use with caution)
Turn in
Understeer
All Speeds:

1. Adjust front tyre pressures
2. Soften front anti-roll bar
3. Increase front toe out
4. Decrease diff coast locking
5. Soften front springs

Mid-High Speed:
Reduce rear wing angle or Increase front wing angle

When braking:
Move brake bias backward

Oversteer
All Speeds:

1. Adjust rear tyre pressure
2. Stiffen front anti-roll bar
3. Decrease front toe out
4. Stiffen diff coast locking
5. Soften front springs

Mid-High Speed:
Increase rear wing angle or Decrease front wing angle

Lift off oversteer

1. Increase diff coast locking
2. Increase pre-load value

Corner Exit
Understeer
All Speeds:

1. Stiffen rear anti-roll bar
2. Increase diff power locking
3. Stiffen rear springs

Mid-High Speed:
Reduce rear wing angle or increase front wing angle

Oversteer
All Speeds:

1. Soften rear anti-roll bar
2. Decrease diff power locking
3. Soften rear springs

Mid-High Speed:
Increase rear wing angle or decrease front wing angle

Lift off oversteer
PICNIC

(Problem in chair, not in car)

Car bounces during weight transfer
When Braking, Accelerating & Turning

Increase slow damper settings

On Bumps / Curbs
Increase fast damper settings

Other
Tyres overheat
All Over:

1. Increase pressures
2. Decrease toe value

On Inside Edge
Reduce negative camber

On Outer Edge
Increase negative camber

In Middle
Reduce pressures

Tyres cold
All Over:

1. Decrease pressures
2. Increase toe value

Car edgy during weight transfar
When Braking, Accelerating & Turning

Decrease slow damper setting

On Bumps / Curbs Decrease fast damper setting

Low top speed
Reduce wing values
Car edgy during weight transfar
When Braking, Accelerating & Turning

Decrease slow damper setting

On Bumps / Curbs Decrease fast damper setting

Tips
Ride height
As low as possible, but avoid grounding car or stalling the aero
Dampers
Bump setting should be lower than the corresponding rebound setting

Try to use the lowest setting that avoids oscillation / bouncing

Can be used to tune the responsiveness of the car.

High values = more responsive
Low values = more stable

Aero
Use ride height and rake to generate as much downforce as possible, then trim the aero balance using the wings and / or splitter.

Increasing the rake moves the aero balance backwards.

Run the car as stiff as needed to maintain stable ride height

Brake bias
Front tyres should lock just

before the rears for best stability

Origin

With the permission of Skaven Zverov the Setup Guide for Beginners from Him will be also Published here on the Wiki.

Adam Isailovic (Skaven Zverov): https://www.assettocorsa.net/forum/index.php?members/skaven-zverov.192248/ ACC Forum Thread: https://www.assettocorsa.net/forum/index.php?threads/setup-guide-for-begginers.64264/

Setup guide for beginners.jpeg
Retrieved from "https://www.acc-wiki.info/index.php?title=Setup_Guide_for_Beginners&oldid=27417"