Game Settings

500px

Video

File:Options video eng.jpg

Setting	Description
Fullscreen	Here you can set whether the game should be displayed in full screen or in the window. Full Screen is resource efficient. Because Windows stops or ends all resources that are not relevant to the game. In frameless window or window mode, the game behaves like any program.
Resolution	Higher values ​​lead to a better picture. It is recommended to choose the native resolution of your monitor. For more resolution manipulation settings. ↓Basic / Resolution Scale ↓Advanced / Temporal Upsampling
V-Sync	It allows synchronizing the frame rate of the game with the monitor refresh rate for a better stability and smoother image. Disabling V-Sync can Result in higher frame rate but this action may introduce unwanted artefacts in the Game. You may experiance some output lag when V-Sync is turned on. When you have a Free-Sync or G-Sync Monitor you can turn V-Sync off.
Framerate Limit	limit the maximum amount of FPS that should be achieved (works with V-Sync on and off)
Triple Screen	Turn on triple-screen support. More ↓Triple Screen and View Settings
HDR Output	Enables high dynamic range output on HDR-compatible Displays.

Triple Screen and View Settings

Put yourself in driving mode in a car. Menu with different options: click on "View Settings". If you selected "disabled" under "Video / Triple Screen", they should be grayed out.

File:Acc-wiki triplescreen and viewsettings.jpg

Triple Screen & View Settings

VIEW SETTINGS - Not all settings are available for the different driving views ( F1 key).

Property	Values	Description
Height	-30 → 0.0 ← 30	Adjust driver eye level
Lateral	-30 → 0.0 ← 30	adjust the seat to left or right
Distance	-60 → 0.0 ← 60	Distance Driver to Cockpit
FOV	10° → 54° ← 90°	Field of View
Pitch	-20.0° → 0.0 ← 20.0°	adjust the angle of view downwards or upwards
Driver & Wheel	→ Both ← / Wheel only / Locked Wheel / Hidden
Lock to Horizon	0% → 100%	Hold on to the horizon :)
Movement	0% → 100%	Adjust vehicle movement
Dashcam Factor	0% → 100%	How much of the set vehicle movement should be taken over in the DASH perspective.
Look with Wheel	0% → 100%	Adjust head movement when steering
LWW Gamma	0% → 50% ← 100%
LWW Smooth	0% → 50% ← 100%
Projection Correction	0.0 ← 1.0

TRIPLE SCREEN

Property	Values	Description
Distance From Screen	0mm → 500mm ← 3000mm	Set here how big is the distance from your eyes to the middle monitor
Screen Width	0mm → 500mm ← 3000mm
Bezel Width	-1000mm → 0mm ← 1000mm	How wide are the side edges of your monitors
Side Screen Angle	→ 0° ← 90°	At what angle to the middle monitor are the side monitors set up.

Predefined Setting

Setting	Description
Button: Manage Custom Video Presets	Save your graphic sets here ( only settings from here on )
Sets	select an already prepared setup here: Low / Medium / High / Epic / Custom

Basic

Setting	Description
Resolution Scale	It allows downscaling ( for better performance ) and upscaling ( for better image quality ) the game resolution without changing the system resolution.
View Distance	Set the Distance from Camera for Objects to be drawn.
Shadows	Set the Quality of dynamic Shadows of Track Objects. The highest Settings require significant computing power.
Shadows Distance	Set the Distance of dynamic Shadows of Track Objects. The highest Settings require significant computing power.
Antialiasing	Set the amount of Antialiasing for the selected Antialiasing Type.
Antialiasing Type	Set the Method used to avoid jagged edges in the Image. Temporal results in a smoother Image, while FXAA is sharper but allows more jagged edges to be shown.
Effects	Set the Quality of Visual Effects
Post Processing	Set the Quality of Post-Processing Effects such as Motion blur and depth of field.
Foliage	Set the Level of visible secondary-level Vegetation.
Texture	Set the quality Level of Object Textures.
Mirror View Distance	Set the Distance of opponent Cars to be shown in the Mirrors.
Mirror Quality	Set the quality for the Image in the Mirrors.
Mirror Resolution	Set the Resolution of the Image rendered in the Mirrors.
Opponents visibility	Set the Number of visible opponent Cars at the same Time. Rendering fewer Cars can allow you to race with larger Grids.

Virtual Reality

Setting	Description
VR Pixel Density	Set the percentage of samples for VR rendering. Going over 100% results in a sharper Image but requires more processing power.
Virtual to Real Scale

Advanced

Setting	Description
Materials Quality	Level of complexity of some Materials. Epic settings can significantly impact GPU performance in every configuration scenario.
Temporal Upsampling	Engine feature used in conjunction with Resolution Scale. Results in a better Overall Image Quality when ↑Basic /Resolution Scale is lower than 100. It is also useful to avoid specular higlight flickering of limit Materials.
Bloom Quality	Quality level of light diffusion in high contrast scenarios.
Volumetric Fog	Atmospheric effect that makes haze visible when hit by light.
Foliage LOD Quality	Simple multiplier for instanced mesh LOD switching. Epic setting can impact GPU Performance with low/mid-range configurations.
Car LOD Quality	Adjust car model level of detail - lower values make cars appear less detailed in the distance at the benefit of higher framerates.
HLOD	Enable or disable HLOD's. HLOD is a hierarchical level of detail function that combines complex track objects into simplified objects at greater distance. Enabling them increases performance by lowering the number of draw calls per frame.
Advanced Sharpen Filter	An additional post-processing Filter that improves clarity for details further away from the playing position. It is highly suggested to Enable Advanced Sharpen Filter only if Sharpen setting in the Basic tab is unchanged.

Image customization

Setting	Description
Motion Blur	Show blur effect with the fast movement of track objects.
Saturation	Set the amount of color saturation of the ingame image.
White Balance	Adjust the white balance of the in-game image. The Settings range from cold to warm.
Sharpness	Set the percentage of a post-processing filter that increases the sharpness of the overall image. It is highly suggested to edit Sharpness only if Advanced Sharpen filter is disabled.
Camera drift Effect	Post-Processing Effect that simulates a dirty lens in the Camera.
Image Contrast	Adjust the contrast of the ingame image.
Exposure Gain	Adjust the exposure gain of the in-game image

Audio

File:Options audio eng.jpg

Settings	Description
Output Device	Set the Output Device for the Audio Output.
Master	Set the overall volume.
Onboard Engine	Set the volume of onboard engine sound.
Exterior Engine	Set the volume of exterior engine sound.
Opponents	Set the volume of the opponents. This value is a factor multiplied by the exterior engine volume.
Tyres	Set the volume of tyre skids, brake squealing, ABS, kerbs rumble and surface noises.
Weather	Set the volume of wind, rain and thunder when using onbard cameras.
Ambience	Set the volume of the soundscape ( crowd, track, speakers, pit lane alarm ), rain and thunder when using track cameras.
Damage	Set the volume of crashes, vehicle damage and bodywork sounds.
Radio Comms	Set the volume of the radio comms.
Starting Comms	on/off
Spotter	on/off
Music	Set the volume of the music
User Interface	Set the volume of the interface interactions
Video Sequences	Set the volume of the Video Sequences

Controls

File:Options controls eng.jpg

The Simulation is playable with diverse FFB Racing Wheels, XBox-GamePad and Keyboards.

FFB Racing Wheels Support

Brand	Wheels	Pedals	H-Shifter
Fanatec	all	all	all
Logitech	G25, G27, G29, G920	included with the wheels	included with the wheels G25, G27 Driving Force Shifter G29, G920
Thrustmaster	T150, T300, T300RS, T500RS, TS-PC Racer	T3PA, T3PA-PRO	TH8A
Simucube	all
...

Force Feedback - FFB

Property	Values	Description
Gain	0% → 100%	Set FFB strength
Minimum Force	0% → 15%	Raise the minimum FFB forces by the selected percentage.
Dynamic Damping	0% → 200%	...
Road Effects	0% → 100%	An artificially created effect. If you only want pure FFB, leave it at 0.
Frequency	111Hz / 222Hz / 333Hz	How fast should the query of the FFB information be made or processed. CAUTION: For old racing steering wheels, example G25 / G27, leave the value at 111Hz
Advanced
Steer Lock	0° → 1200°	Set maximum steering angle. Set the Native Angle of the Steering Wheel / Wheel Base.
Steer Liniarity	1.00 → 4.00	...
Brake Gamma	1.00 → 5.00	Changes the linearity of the brake axis
Gearshift Ddebouncing	50ms, 60ms → 500ms	Double upshift when operating the gear? Here with a higher value try to fix.

Mods & Tweaks - FFB

Hotkeys

Keys	Description
F1	Switch on the driving camera ( Driver / dash / helmet / bonnet / front / flying camera close & far )
F2	Switch HUD forward ( blank / HUD help / table / broadcast )
Shift + F2	Switch HUD backwards ( blank / HUD help / table / broadcast )
F3	Switch on TV cameras (near / far / helicopter)
F6	Switch on vehicle cameras
F7	Turn on the free camera
F8	Create a screenshot. You find them under: ...:\Users\***\Documents\Assetto Corsa Competizione\Screenshots Open Photo Mode Menu → Press the mouse wheel Camera Speed → Turn the mouse wheel change of direction - keys: ← → ↑ ↓
F11	Switch window mode: window with frame and full screen
Enter	Open chat in multiplayer
Insert	Switch on the multifunction display ( RealTime / Standing / Vehicle Setup / Pitstop [ in race only ] )
TAB	current table ( in driving mode )
Shift + ←	watch next vehicle
Shift + →	watch the previous vehicle
Shift + ↑	back to your vehicle
CTRL + ←	Field of View "FOV" lower
CTRL + →	Field of view "FOV" higher
CTRL + ↑	Move driver position forward
CTRL + ↓	Move driver position to the rear
CTRL + Shift + ↑	driver position: up
CTRL + Shift + ↓	driver position: down
CTRL + Shift + ←	driver position: left
CTRL + Shift + →	driver position: right
ALT + ↑	camera pitch ( angle ): up
ALT + ↓	camera pitch ( angle ): down
ALT + ←	left indicator
ALT + →	right indicator
Shift + I	Ignition on/off
S	Start the Engine
ALT + R	Switch Wiper Mode
ALT + W	Wiper on/off
Shift + A	ABS: Increase
CTRL + A	ABS: Decrease
Shift + B	Brake Bias: Increase
CTRL + B	Brake Bias: Decrease
Shift + E	Engine Map: Increase
CTRL + E	Engine Map: Decrease
Shift + T	Traction Control - TC: Increase
CTRL + T	Traction Control - TC: Decrease
Shift + Y	Traction Control Cut -TCC: Increase ( examble: Ferrari )
CTRL + Y	Traction Control Cut -TCC: Decrease
Shift + D	Racelogic ( dashboard ) - switch to the previous display
CTRL + D	Racelogic ( dashboard ) - switch to the next display
ALT + D	Racelogic ( dashboard ) - switch through the ads
L	Light modes: on / off / endurance auxiliary lights
Shift + L	Flasher
CTRL + L	Rain light on/off ( located at the rear of the vehicle )
ALT + L	Pit Limiter on/off
V	Driver name: on/off / only in multiplayer view
NumPad2	look backwards
NumPad4	look to the left
NumPad6	look to the right
M	Save replay (outsmart 1H limitation of replays)
ALT + M	Save highlight

General

File:Options general eng.jpg

Settings	Description
Languge	Set the language for the Game.
Skip intro sequence	Disable the intro camera sequence when entering a session. This option is automatically set to off in VR mode and Multiplayer.
D-Box Motion	Enable or disable the D-Box motion Plugin.
Fanatec Leds	Enable or disable the Fanatec LED Plugin.
Replay max Length	Set the maximum length of a saved replay. ( max is 1h 15min )
Replay quality	Set the quality level of the replay.
Far AI replay quality	Set the replay quality of distant opponent cars from the player car.
Auto highlights	Enable or disable automatic saving of replay highlights.
Player-only Auto highlights	Enable or disable automatic featuring only the player car
Manual highlights per Time	Set the pre-time duration of replay highlights.
Manual highlights post Time	Set the post-time duration of replay highlights.
Auto Save replay	Enable or disable automatic saving of replays.
Min replay Time for autosave	Set the minimum reply time duration for automatic replay saving
Replay Race Autosave Slots	Set the Number of automatic saving slots for race sessions.
Replay Qualy Autosave Slots	Set the number of automatic saving slots for qualifying sessions.
Replay Other Autosave Slots	Set the number of automatic saving slots for other sessions.
Pitcrew Animation	Toggle the visibility of the pit crew and related animations.
Pit Markers	Toggle the visibility of additional animated pit marker.
Rating	Allow to turn off Rating for Singleplayer game modes. You can use this to protect your SA Rating, or just freeze your Ratings while you show Assetto Corsa Competitione to friends and family. Please note that this intended to disable any kind of progress, including Track Medals and Special Event leaderboard entries.
Online Stats	Allows to turn off Driver Statistik for Singleplayer game modes. You can use thiss to freeze your Statistik while you show Assetto Corsa Competitione to friends and family.

Assists

File:Options assists eng.jpg

Settings	Description
Gearbox	GT3 racing cars use sequential gearboxes that change gears in a sequence without using a manual clutch. Automatic mode changes gears automatically except for reverse and neutral. Automatic mode affects your realism score.
Clutch	Automatic clutch mode operates the clutch automatically when the car is stopped or starts from a standstill. By doing so, it protects the engine from stalling. It changes to automatic mode if engine start is also set to automatic. Manual clutch settings will let you operate the clutch manually during start or when the car is stopped with a gear engaged. Failing to operate the clutch correctly will result in the car stalling.
Engine Start	Automatic engine start means the engine will start automatically even when you spin or stop with a gear engaged. If the engine stalls, it will start again automatically. When it is selected, the clutch will also be set to automatic mode. Manual engine start requires you to set up inputs to control the ignition and engine starter. If the engine stalls while driving, you will need to restart it by pressing the key or button configured in the controller settings.
Wipers	Toggle automatic or manual wipers. The automatic wiper function will automatically enable the wiper and set the appropriate wiper speed according to the weather conditions.i It also sense water spray kicked up by opponent cars in front of the player.
Lights	Toggle automatic or manual lights. Using automatic lights will automatically turn on the appropriate light stage according to the time of day and weather conditions.
Pit Limiter	Toggle automatic or manual pit limiter. The automatic pit limiter will engage the pit limiter when crossing the pitlane entry line. However, the automatic pit limiter does not function as automatic brake, the car still needs to be slowed down to the pit speed limit before entering the pitlane. Also you need to be in first Gear. When you shift up it will automatically turn off the Limiter.
Stability Control	Stability control allows more stable cornering and makes it harder to spin. The higher percentage is set, the more stable the car will be, and thus, easer to drive. The use of stability control is prohibited in blancpain regulations, so this setting is to be considered an additional gameplay assist and not a realistic option. Enabling any percentage of stability control affects your realism score.
Ideal Line	Enabling the Ideal line draws a graphical line on the circuit that is visible during driving. The line shows the optimum racing line to follow. The line will change colours if you need to brake before a curve or accelerate out of a curve. Enabling the Ideal line affects your realism score.

HUD

File:Options hud eng.jpg

Settings	Description	Image Position
Scale	Adjust the overall scaling of all the HUD elements.
Left Margin
Right Margin
Circuit Map	Enable or disable the circuit map overlay on the racing HUD.	7
Gear / Speed	Enable or disable the gear and speed widget on the racing HUD. This widget shows basic information about the car, uncluding engine speed, ground speed, traction control, ABS, brake bias levels and pedal inputs.	4
Speed Units	Set metric or imperial units when displaying speed values on the racing HUD.
Tyres App	Enable or disable the tyres widget on the racing HUD.	5
Virtual Mirror	Enable or disable the virtual mirror. The virtual mirror allows the player to see the mirror image even with narrow field of view. This will not work in VR.
Proximity Indicators	Enable or disable the proximity indicators on the racing HUD. Proximity indicators help indicate opponent cars behind and on the side of the player car.
Lap Time
Session Iinfo	Enable or disable the session information overlay on the racing HUD.	2
Rating Practice Info	Adjust the competence focus of the rating widget in the practice sessions. Use this option to work on specific driving competences, such as driving consistency and car control.	3
Driver Name Tags	Enable or disable driver name tags over cars. Settings include enable, disable and Multiplayer only.
Radar	Enable or disable the radar widget on the racing HUD. The radar increases spatial awareness by displaying cars in the proximity of the player car, and uses visual cues to alert the player of overlap to help avoid collisions.
Server Statistics	Display server connection statistics during multiplayer session.
Pop-Up Chat Messages	Enable to have new chat messages pop up in the HUD

References

Dynamic Dambing - Details by Pax - https://www.assettocorsa.net/forum/index.php?threads/dynamic-damper-details.52794/